Now you can have a 3 speed hub with an
8 or 9 speed cassette, and a disc brake! They say you can remove the
multi-speed crank set. But in reality the only way to get a low enough gear for
a trike to climb a 16% grade with about 300 lbs total weight, is to use 22
sprocket chain ring and 34 sprockets on the rear, that would be about 13 gear
inches for a 26 inch wheel and 10 GI for a 20 inch wheel.
It would be much cheaper to use a Mountain tamer fourth chain ring of 18 sprockets in the front, equaling 10.5 gear inches.
 |
| Sram dual drive 3 speed with cassette |
 |
| Sturmey Archer F30 rear 3 speed disc brake 9 speed cassette |
These are best used on trikes because
bicycles cannot be ridden under 3 mph! But it will allow a
trike to be ridden up some very steep hills.
 |
| http://www.utahtrikes.com/RECENTTRIKE-Ashleys_Annihilator.html |
No comments:
Post a Comment
WARNING! Do NOT click on the let me know when new comments are made !!! You will be sorry!